This 33 mm female replica watches uk section Baroncelli Belle Serena replica watches online collection series commemorative section of ultra-thin wrist watch look and men are exactly the same, last year's brand to celebrate the rolex replica 40th anniversary of the birth of the Belem Serena series of commemorative swiss replica watches models launched.
The Classic
My "Classic" pistols are built one at a time on customer supplied Colt NRM or Series 70 base guns, sparing no attention to detail. The options included in this package are selected to build a pistol that has already stood the test of time and is in fact a modern day Classic. As with all of my work, nothing is farmed out, other than tritium inserts and specialized finishes. All of the custom work is done in my shop, with my hands. Each "Classic" pistol is crafted as if it were to be the final pistol leaving my shop and will serve as the defining example of my craftsmanship.
Package features:
  • Slide to Frame fit is tightened and hand lapped for maximum contact in bearing surfaces with smooth operation and no play.
  • Kart match barrel and EGW bushing tightly fitted for superb accuracy and reliability. Note: certain calibers other than .45 ACP require ramped barrels at extra cost.
  • Bo-Mar BMCS style rear sight low mounted in deluxe pocket cut with custom machined dovetail front sight, machined to customer's spec.
  • Slide is serrated 30 lpi around the slide's top radius.
  • Lower and flute ejection port, relieving front edge to clear live rounds.
  • Rear of slide, frame, ejector and extractor blended together and serrated 50 lpi.
  • Breech face polished and firing pin hole lightly beveled.
  • Heavy duty extractor fitted and tuned.
  • EGW oversize firing pin stop fitted to a snug fit to eliminate extractor "clocking" and the risk of a loose firing pin stop falling down, jamming the gun.
  • EGW extended ejector fitted and Loc-Tited in place.
  • EGW bar stock medium paddle extended thumb safety fitted and melted to remove all abrasive points.
  • High-grip beavertail grip safety fitted to a hairline joint with the frame (either Chip McCormick or Wilson) and sensitivity adjusted for proper operation in blocking the trigger.
  • EGW slide stop properly fitted to avoid premature slide lock-back.
  • Harrison Design bar stock plunger tube staked in countersunk holes and Loc-Tited in place.
  • 3# crisp trigger job using Harrison Design tool steel slotted Commander hammer, sear & disconnector with Wolff springs and Harrison Design Extreme Service long, medium or short solid aluminum trigger.
  • Front strap machined for high grip, trued to remove high / low spots then machine checkered, hand finished 25 lpi, full coverage.
  • Ed Brown 25 lpi flat main spring housing fitted.
  • All corners beveled and lightly melted to retain the original lines, yet remove all unwanted abrasive points.
  • Magazine well is machine cut and hand finished to a 60 degree bevel.
  • King's narrow slot grip screws with slots indexed and numbered.
  • Harrison Design bar stockextended magazine catch fitted
  • Dust cover marked "Custom by J Harrison"
  • Finished in your choice of polished blue, two-tone blue/hard chrome or matte hard chrome finish.
Package price:   $3,125.00
Please call or email to discuss other suitable base guns.