Services
Accuracy Modifications and Tuning Work
301
Machine slide and frame to fit from oversize parts $125
302
Weld and remachine loose slide and frame to fit $200
303
Acc-U-Rail $250
304
Supply & fit Kart 5" .45ACP standard match barrel, bushing, link & pin. Ream & polish chamber, profile & polish feed ramp. Check & correct link down timing. Other caliber or ramp configuration Kart barrels and Nowlin or Bar-Sto barrels available at extra cost. $360
305
Supply & fit solid barrel bushing $70
306
Supply & fit H-D logo bushing and spring plug $100
307
Machine frame bridge for barrel with integral feed ramp $115
308
Re-crown barrel $25
309
Re-crown muzzle flush with barrel bushing to deep, polished configuration $85
310
Function Reliability Package $95
311
Cut detent in slide stop $10
312
Supply and fit Harrison Design Extreme Service extended ejector $68
313
Re-machine frame feed ramp to correct specs $50
314
Supply and install Harrison Design Extreme Service forged slide stop $65
315
Supply and install EGW barstock slide stop $75
316
Supply & fit Harrison Design Extreme Service firing pin stop $55
317
Supply, fit and tune Harrison Design tool steel extractor $70
318
Machine frame pocket and install steel feed ramp in aluminum frame $135
319
Machine frame to lower barrel bed $35
320
Machine frame for "bow tie" clearance cut on frame bridge vertical impact surface $35
321
Machine frame to correctly locate seat for recoil spring guide & forward end of frame rails and reshape barrel's lower lugs to correct Commander dimensions $155
322
Modify slide stop & plunger for "E-Z IN" installation to reduce chances of idiot scratches $15
323
Locate and drill one piece full length guide rod for take down pin hole $15
324
Repair damaged or over-cut steel frame feed ramp by machining pocket and installing steel feed ramp insert. $175