Copyright: All content appearing on this Web site is the property of Harrison Design and Consulting, LLC 4313 White Hickory Lane, Kennesaw, GA 30152 Copyright © 2010. All rights reserved. As a user, you are authorized only to view, copy, print, and distribute documents and photos on this Web site so long as (1) they are used for informational purposes only, and (2) any copy of the document or photo (or portion thereof) includes the following copyright notice: Copyright ®2010 Harrison Design & Consulting, LLC. All rights reserved.
Harrison Design and Consulting, LLC recommends that all parts be installed by a 1911 trained professional gunsmith and that all firearms be tested for safety and function by a professional gunsmith prior to use.
Our Harrison Design products have been tested in not only in the Harrison Design shop, but by countless other custom gunsmiths and major manufacturers across the Unites States. These parts have proven their suitability and correctness of design for their intended purpose. We occasionally encounter a pistol that is dimensionally out of spec, that presents installation challenges requiring equipment, tooling and expertise beyond that available to the home hobbiest. When we encounter these situations, we make adjustments as needed to custom fit the part to the out-of-spec pistol and work around whatever dimensional challenge the out-of-spec pistol has created. This is part and parcel of being a gunsmith. If you try to install a part in one of these situations without the necessary experience and equipment, you may alter the part to a point where it is no longer suitable to use. Those situations are the risk you take on when you attempt to do your own work instead of getting expert assistance.
We want you to be happy with your experience of doing business with Harrison Design. If we made an error we'll make it right, no questions - just get in touch via email.
You have 30 calendar days to return an item from the date you received it. Your item must be unused and in the same condition that you received it.
We will be glad to exchange an item without any restocking charge, but with the same condition requirements as any return.
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund (via original method of payment).
Restocking charge and Shipping refunds
If you are returning merchandise because you changed your mind, sold your gun, couldn't figure out how to install it, was told by someone that you bought the wrong part, etc. you will be charged a restocking fee because we are charged a credit card processing fee every time we make a sale or make a refund. So if you return merchandise for a refund, we get a double charge from the bank, one on the sale and another on the refund, plus we typically have to repackage the part because it is not in good enough shape to resell. We do not refund the original shipping charge in these cases.You will be responsible for paying for your own shipping costs for returning your item.
If we determine that the part was defective, or we made a mistake with your order, we will cover shipping cost to send you a replacement part and send you a prepaid return label to send the original part to us.
If you have any questions on how to return your item to us, contact us.
We at Harrison Design want you to be satisfied with your merchandise and we enjoy a great reputation of working with our customers to achieve that goal. However, there are a couple of things that need to be said due to the fact that we carry products from other manufacturers, primarily as a service to our customers.
If you have a complaint or problem with a product made by Tripp Research, Trijicon or Dawson Precision, you need to go to those companies for warranty assistance. We at Harrison Design have no authorization or ability to handle warranty claims for them. We'll be glad to help you with advise or information, but we cannot resolve warranty problems for those companies. They are great suppliers, or I wouldn't deal with them and I have every confidence they will stand behind their product and work with you to resolve your problem.
A word about Trijicon tritium lamps - There is a certain amount of inherent fragility in the make-up of a tritium lamp. There is a glass capsule inside. When you install the sight, if you are rough with installing the sight into the dovetail, you can damage the lamp in a manner where it can leak it's internal gas and cause the lamp to stop glowing. When installing a tritium sight, file the dovetail until the sight will start in the dovetail cut by thumb pressure at least 1/4 of the way, then use a sight pusher to finish centering the sight in the slide. Then after you confirm zero, you can put a drop of LocTite adhesive in the side of the dovetail joint and prop the gun on it's side so the LocTite will seep into the joint.
Again, Trijicon recommends using a sight pusher and has been known to deny claims when they find evidence of use of a hammer and punch.
The other thing to know is that if a tritium lamp fails, please understand that your sight will have to go back to Trijicon for replacement of the failed lamp. I will not send you a brand new sight because the tritium lamp failed. Be aware that if Trijicon finds any evidence of damage to the sight, they may (and probably will) deny warranty and assess a repair charge that will have to be paid before they will return your sight.
The bottom line is this- If Harrison Design installs your sight and there's a problem with your lamp, we will resolve it. If you or your gunsmith install it, you will need to go to Trijicon for warranty. The link to start the process is: https://www.trijicon.com/na_en/support/return_authorization.php
The content included in this web site is provided for information and entertainment purposes only. The content is subject to change without notice as are any products, programs, offerings, or technical information described in this web site. Harrison Design and Consulting, LLC makes no representation or warranty whatsoever regarding the completeness, quality, or adequacy of the information provided by this web site. By using this web site, you assume the risk that the content on this web site may be inaccurate, incomplete or may not meet your needs and requirements. Harrison Design and Consulting, LLC SPECIFICALLY DISCLAIMS ALL LIABILITY, EXPRESS OR IMPLIED, FOR THE USE, PROPER OR IMPROPER, OF THE PRODUCTS AND INFORMATION PROVIDED. IN NO EVENT WILL Harrison Design and Consulting, LLC BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.